Front bumper removal procedure
Front bumper removal: (1) remove the trim pieces from the fenders first — these use tight clips, be careful not to break them; (2) remove all bolts/ screws around the bumper (top, bottom, and sides); (3) disengage the clips between the fender and the bumper; (4) carefully separate the bumper from the vehicle. Note: the bumper is one piece, not three — the visible trim accents/inserts are separate pieces attached to it, not bumper sections 12.
Related pages
- Front bumper — part numbers and pricing (restyle)
- PDC sensor issues after bumper removal
- Door panel — removal, tweeters, and water drainage
- Rear bumper trim — replacement process and part pricing
- Plastic bumper repair — hot-air welding
Sources
This page is compiled from 2 community messages. Every fact carries a numbered reference to its original author and message.
Last updated: 2026-07-24
-
дмитрий 174 (1105604784) · FAW X80 🚘🛠🛞 · 2024-04-17 · original message · ru ↩
-
Эдуард Янонис (1292719479) · FAW X80 🚘🛠🛞 · 2024-04-17 · original message · ru ↩