Torx fasteners on the X80

Tags: #tools

Torx is uncommon on the X80. Unlike European cars (Renault, VW), which use Torx (star-pattern) fasteners extensively, the FAW X80 predominantly uses hex, square, and standard nut fasteners. Torx tools are reported as generally not essential for routine X80 maintenance^12345678.

Three confirmed Torx locations. 1. Stabilizer bar mounting studs — internal T25 Torx, used specifically to prevent the pin from rotating during installation. 2. MAP (manifold absolute pressure) sensor in the intake manifold — T25 fastener. 3. Camshaft pulleys — T50 fasteners^12345678.

Related pages

• Engine mount replacement — tools and procedure
• Spark plugs — installation, torque and tools
• OBD2 scanner recommendation
• Engine oil change — filter, plug, and DIY tools
• Interior trim removal — tools and technique

Sources

This page is compiled from 8 community messages. Every fact carries a numbered reference to its original author and message.

Last updated: 2026-07-24