Steering column / dashboard bezel squeak

Tags: #squeak

The plastic bezel frame around the gauge cluster (tachometer and speedometer) can squeak due to vibration and a loose fit. Symptom: squeaking is heard when pressing the upper area of the bezel frame by hand ¹.

Two fixes reported: (1) apply silicone lubricant to the contact points — Molykote 111 was specifically recommended, rated -40 to +260°C; or (2) remove the panel and re-glue it using acoustic foam tape to close the vibration gaps ¹².

Media

Dashboard photo showing plastic bezel frame around gauge cluster with arrows pointing to the squeak location

Acoustic foam tape used for re-gluing the bezel frame to eliminate the vibration gap

Related pages

• Front upper control arm — squeak and parts
• Steering column lock type
• Hot air leak — steering column vent damper
• Steering wheel heater — aftermarket installation
• Steering wheel cover — seasonal price

Sources

This page is compiled from 2 community messages. Every fact carries a numbered reference to its original author and message.

Last updated: 2026-07-20