Skip to content

Wheel nut thread specification — M12×1.5

Tags: #wheels

Many online sources and parts catalogs list the FAW X80 wheel nut thread as M12×1.25. This is wrong and can cause fitting issues or an improperly seated wheel if nuts of that spec are ordered. The actual factory specification, confirmed for the 2018+ restyled ("рестайл") model, is M12×1.5 thread pitch 1234. M12×1.25 nuts will not thread properly onto the X80's studs 2. Verify by measuring nuts removed from the car, or testing fit at time of purchase, before relying on a catalog listing 5.

Sources

This page is compiled from 5 community messages. Every fact carries a numbered reference to its original author and message.

Last updated: 2026-07-20

  1. Привет (5158618160) · FAW X80 🚘🛠🛞 · 2024-10-09 · original message · ru ↩

  2. Иван (935119384) · FAW X80 🚘🛠🛞 · 2025-04-15 · original message · ru ↩↩

  3. Иван (935119384) · FAW X80 🚘🛠🛞 · 2025-04-15 · original message · ru ↩

  4. Иван (935119384) · FAW X80 🚘🛠🛞 · 2025-04-16 · original message · ru ↩

  5. Anonymous (5265219211) · FAW X80 🚘🛠🛞 · 2025-04-15 · original message · ru ↩